DESCRIPTION HARDEX HD250 is an industrial-grade belt dressing formulated to extend belt life and enhance performance. It conditions belts to prevent drying and cracking, stops squeaking, and prevents slippage caused by heat, cold, dampness, glazing, and dust. This spray ensures better grip and traction, reducing premature wear and tear.​ ✅ Key Features: Prevents belt slippage under various environmental conditions. Eliminates squeaking noises. Conditions belts to prevent drying and cracking. Enhances grip and traction. Suitable for indoor and outdoor use.​ 📌 Recommended Applications: Fan belts. Power steering belts. Water pumps. Power tools. Sewing machines. All types of machinery belts.​ read more

DESCRIPTION CRC Soft Seal is a long-term indoor/outdoor corrosion inhibitor designed for machined surfaces and assemblies subjected to extended storage or adverse shipping conditions. It displaces moisture and forms a transparent, amber waxy film that provides heavy protection against heat, humidity, and corrosive atmospheres. Ideal for safeguarding equipment during shipping, even when exposed to salt spray and other corrosive environments.​ ✅ Key Features: Durable Protection: Forms a flexible, non-brittle coating that resists cracking and crazing. Corrosion Resistance: Withstands over 400 hours in salt spray tests (ASTM B117). Material Compatibility: Safe for use on plastics, rubber, paint, and insulation materials. Easy Application & Removal: Can be reapplied over existing films and removed with CRC Brakleen or mineral spirits. Temperature Range: Effective from -20°C to +100°C. ​ 📌 Typical Applications: Valves, cable end sealers, dies, moulds, bits, spindles, and instrumentation. Motors, shafts, and equipment exposed to the elements. Outdoor storage of raw materials and finished stock. Electrical circuits, battery terminals, and connectors.​ read more

DESCRIPTION WEICON Leak Detection Spray is a non-flammable, anti-corrosive, and DVGW-approved solution designed for the quick and reliable detection of leaks in pressurized systems. It forms foam upon application, making it easy to identify even the smallest leaks.​ ✅ Key Features: DVGW-certified (DIN EN 14291) Non-flammable and safe for use with various gases Anti-corrosive to protect metal surfaces Compatible with CO₂, propane, butane, acetylene, oxygen, and natural gases Effective in temperatures from 0°C to +50°C Silicone-free formulation​ 📌 Applications: Compressed air systems Gas pipelines Pneumatic brakes Welded joints and threaded connections HVAC systems​ read more

DESCRIPTION CRC Red Urethane Seal Coat is a single-component polyurethane coating designed to insulate electrical equipment and protect against moisture and corrosion. Its red color facilitates easy visual inspection, ensuring thorough coverage.​ ✅ Key Features: Electrical Insulation: Non-conductive film with a dielectric strength of 3,100 volts/mil. Durable Protection: Resistant to moisture, salt spray, abrasion, and chemicals. High-Temperature Resistance: Withstands temperatures up to 121°C (250°F). Fast Drying: Tack-free in 15–30 minutes; fully cures in 72 hours. Easy Application: Ready-to-use aerosol; no mixing or cleanup required. 📌 Typical Applications: Electric motor windings Terminals and bus bars Commutator ends and stator coils Printed circuit boards (PCBs) Transformer ends and housings Terminal strips, screw connections, and switch boxes read more

DESCRIPTION WEICON Galva Spray provides long-lasting cathodic corrosion protection, colour-matched to fresh hot-dip galvanised steel. It forms a strongly adherent, fast-drying protective layer that resists rust, corrosion, saltwater, and heat up to 300°C. ✅ Key Features: Excellent corrosion resistance (450+ hours in salt spray test – DIN EN 9227) Matches hot-dip galvanised surface colour Resists fresh and salt water, heat resistant up to 300°C Suitable as a primer or finish coat Ideal for: Galvanised part repairs, welded joints, drill holes, car body primer, and spot welding read more

DESCRIPTION CRC Zinc It is a single-component zinc-rich coating formulated with special epoxy resins to provide long-term protection for bare steel and iron surfaces. It delivers the same advantages as hot-dip galvanising, forming a flexible, cathodic protective film to prevent rust and corrosion. 📌 Applications: Ideal for structural steel, fencing, trailers, welding seams, rivet holes, roofs, storage tanks, transformers, oil rigs, ships, transmission towers, and coastal or salt-exposed environments. ✅ Features & Benefits: Easy aerosol application High zinc content for cathodic rust protection Strong adhesion & flexible coating Suitable for touch-ups over galvanised surfaces Lead-free & excellent weldability read more

Features and Benefits Blue, fast curing, low strength, cyanoacrylate-based adhesive for locking metal and plastic fasteners. LOCTITE® 425 is a dark blue, cyanoacrylate-based adhesive specially designed as a fast curing, low-strength adhesive for locking metal and plastic fasteners. Ideal for pre- or post-application. Fixture speed can be increased by using a LOCTITE® activator, such as LOCTITE® SF 7113. It is typically used in applications with an operating range of -54°C to 85°C (-65°F to 185°F).       2-minute cure on plated metal and plastic fasteners with full strength in 24 hours     Used for tamper proofing the heads of screws or potentiometers     Low strength Technical Information Application method Dispense gun Applications Threadlocking Color Dark blue Cure type Moisture cure Fixture time 90.0 sec. Full cure time, @ 25.0 °C 24.0 hr. Key characteristics Cure speed: fast cure, General purpose, Mix: no mix required, Strength: low Strength Number of components 1 part Physical form Liquid Recommended for use with Metal, Plastic Specific gravity, @ 25.0 °C 1.1 Viscosity, Brookfield - LVF, @ 25.0 °C Spindle 1, speed 30 rpm read more

Features and Benefits A primer for making polyolefin and other low-energy surfaces suitable for bonding with LOCTITE instant adhesive. Only recommended for difficult-to-bond substrates. LOCTITE® SF 770 is a primer for making difficult-to-bond substrates and low energy surfaces suitable for bonding with LOCTITE® instant adhesives. Ideal for polyethylene, polypropylene, polytetrafluoroethylene (PTFE) and thermoplastic rubber materials, it fluoresces for quality control and inspection. Not recommended in assemblies where high peel strength is required.       Prepares low-energy surfaces for bonding with instant adhesives     Only for difficult-to-bond plastics     Fluorescent under UV for quality control     Not recommended where high peel strength is required     IMPORTANT: this product was upgraded in 2021/22. Use the correct product IDH/item  number to ensure correct SDS is downloaded.   Technical Information Application method Pre-applied Color Ultra clear Key characteristics Adhesion: improves adhesion Key characteristics, Chemical Basis/Base Heptane (Original Formula); Isopropyl Acetate (Upgrade Formula) Solvent based read more

DESCRIPTION: REMA TIP TOP Solution HL-TNL4 is a CHC-free bonding solution designed for hot vulcanization of conveyor belts with fabric plies. It is suitable for use with Standard, K, and HR quality cover rubber. This solution ensures strong adhesion during splicing and repair processes, contributing to the longevity and reliability of conveyor belt systems. ✅ Key Features: CHC-Free: Environmentally friendly formulation Versatile Application: Compatible with Standard, K, and HR quality cover rubber Reliable Bonding: Provides strong adhesion for hot vulcanization processes read more