Features and Benefits A 1-part, general purpose cleaner that removes most greases, oils, lubrication fluids, metal cuttings and fines from surfaces to be bonded. For effective cleaning and degreasing of plastic components prior to bonding, choose LOCTITE® SF 7070. Suitable for use as a spray or in immersion cleaning at room temperature. This solvent-based, non-CFC cleaner can remove most oils, greases, lubrication fluids, and other contaminants from plastic parts without the risk of stress cracks.       General-purpose parts cleaner     Compatible with most plastics     Will not cause stress cracks     Can be applied by spray or immersion Technical Information Application method Dip, Spray & wipe Applications Parts cleaning Cure type Non-curing Key characteristics Pre-bonding cleaning, Solvent based Physical form Liquid Recommended for use with Plastic read more

Features and Benefits A 1-part, low-odor, low-bloom, medium-viscosity instant adhesive ideal for aesthetic applications. LOCTITE® 403 is a low-odor, low-bloom instant adhesive. This medium viscosity adhesive is ideal for applications where odor and/or blooming are a concern. LOCTITE 403 provides for rapid bonding of metals, elastomers and plastics, including difficult-to-bond plastics (PP, PE, PTFE) when used in conjunction with a primer such as LOCTITE® SF 770.       Low-odor for applications where vapor control is vital     Low-bloom for cosmetic applications     Medium viscosity for gaps of approximately 0.20 mm (0.008'')     Bonds plastics, rubbers and metals Features and Benefits Application method, Recommended Dispense system, Manual Applications, Recommended Bonding close fitting parts Color Ultra clear Fixture time, Steel 30.0 sec. Gap fill 0.2 mm Key characteristics, Recommended Bloom: low bloom, Gap filling, Odor: low odor, Surface insensitive, Viscosity: medium viscosity Operating temperature -40.0 - 80.0 °C (-40.0 - 175.0 °F ) Shear strength, Mild Steel (grit blasted) 20.3 N/mm² (2950.0 psi ) Viscosity 1200.0 mPa·s (cP) read more

Features and Benefits Ideal for use in facilities where food products are produced and/or handled. This food grade anti-seize lubricant prevents friction, seizing, and galling in stainless steel and other metal parts. Prevent seizing, galling, friction, and wear on threaded joints and other metal-to-metal surfaces with LOCTITE® LB 8014. With its combination of white lubricating solids and extreme pressure (EP) additives in an aluminum-gelled white oil, this metal-free, food-grade, anti-seize lubricant can resist temperatures up to 400°C (752°F). It’s ideal for use in industrial food industries, such as meat and poultry packing plants, dairy products processing plants, canning plants, grain processing plants, sugar processing plants, bakeries, beverage plants, breweries, and hospitals. This lubricant paste with an NLGI consistency grade of 0 is registered to NSF Category H1 for use as a lubricant with incidental food contact in and around food processing areas (a regional approval).       Registered to NSF Category H1 for use as a lubricant with incidental food contact     Metal-free      Suitable for applications with an operating range of -30°C to 400°C (-20°F to 750°F)     NLGI grade of 0 read more

Features and Benefits .LOCTITE® SF 7200 is an amber, solvent-based cleaning agent for removing any chemical gasket sealant from metal flanges. It’s particularly suitable for aluminum or other soft metal flanges where scraping could lead to surface damage. When applied, LOCTITE SF 7200 develops a foam-like layer on the gasket, preventing it from running off the desired location – even on vertical surfaces.     Easy application from an aerosol can     Keeps in place on vertical surfaces     Doesn't contain CFC     Removes gasket sealants in 10-15 minutes ​ Technical Information Applications Parts cleaning Product Type Industrial cleaners, General industrial cleaners Technology Names Surface treatments and cleaners, liquid, solvent   read more

Features and Benefits A silver, aluminum, petroleum-based anti-seize lubricant paste fortified with graphite and extreme pressure (EP) additives. LOCTITE® LB 8150 is anti-seize lubricant paste fortified with graphite and extreme pressure (EP) additives. LOCTITE LB 8150 is a silver, aluminum, petroleum-based lubricant and is inert and won't evaporate or harden in extreme heat or cold. It can tolerate high temperatures to 900°C (1652°F) and is suitable for assemblies where such temperatures are possible.       Fortified with graphite and aluminum     Resistant to high temperatures up to 870°C (1600°F)     Protects metal parts from corrosion, seizing, and jamming in joints     Aluminum, petroleum-based lubricant paste     Inert and won't evaporate or harden in extreme heat or cold Technical Information pplication method Brush Applications Lubricating parts Color Silver Cure type Non-curing Key characteristics Aluminum based, Prevents seizing/galling, Temperature resistant Physical form Grease Recommended for use with Metal read more

Features and Benefits LOCTITE® MR GS2 is a black, slow drying, flexible setting, solvent-based sealant paste, which changes to a pliable, non-hardening film. It seals flanges, fittings, connections and flexible assemblies, and improves the sealing of pre-formed gaskets made of, e.g., cork, metal, plastic or rubber in non-rigid assemblies that may require disassembly at frequent intervals. Solvent based Flexible setting Can also be used for repair of damaged pre-cut gaskets Increases the reliability of gasket seals Improves sealing performance of pre-formed gaskets     read more

Features and Benefits Silver, thick, metallic heavy-duty, high-temperature, nickel-based anti-seize lubricant paste. It resists galling and corrosion and reduces wear. LOCTITE® LB 771 is a silver, thick, metallic heavy-duty, high temperature, nickel-based anti-seize lubricant paste. It resists galling and corrosion and reduces wear in heavy pressure applications. It contains tenacious metals, oils and graphite materials. It is used in applications with an operating range of -54 °C to 1315 °C (-65.2 °F to 2399 °F).       Contains tenacious metals, oils and graphite material     Resists galling and corrosion and reduces wear     Exceptionally resistant to attack by acids, ammonia, acetylene and vinyl monomer     Allows easy disassembly of parts after exposure to corrosive or hot environments     Reduces friction for tight assembling of stainless steel threads and press fits     Lubricates and seals pipe threads in acid environments and coats gaskets in high temperature applications     Typically used in applications with an operating range of -54 °C to 1,315 °C (-65.2 °F to   2,399 °F)     Nickel content stays intact up to 1,315 °C (2,399 °F ) Technical Information Application method Brush Applications Lubricating parts Color Silver Cure type Non-curing Key characteristics Chemical resistant, Heavy duty, Nickel based, Pressure: high pressure, Prevents seizing/galling, Temperature: high temperature Number of components 1 part Physical form Paste Recommended for use with Metal, Metal: passive metal read more

Features and Benefits 100% metal-free lubricant to protect multiple types of metal fasteners against corrosion and seizure and keep the machine running efficiently – even at extremely high temperatures up to 1315°C (2400°F).  For an anti-seize lubricant paste that is free from lead, copper, sulfur, and their compounds, there’s LOCTITE® LB 8009. It’s suitable for use with a variety of metals including aluminum, titanium, stainless steel and other nickel alloys and can be applied on bolts, screws, studs, pipe joints, nuts, plugs, bushing, extruding and forming dies, heat exchangers, shear blades, metal bending, mechanical packings, etc. LOCTITE LB 8009 is resistant to extremely high temperatures - up to 1315°C ( 2400°F) - making it ideal for use in large-scale industrial applications, such as chemical plants, oil refineries, power plants, ship and aerospace manufacturing and service, paper mills, steel mills and foundries, and synthetic fibre plants.      Metal-free for applications requiring a copper and nickel free product     Fortified with graphite and calcium fluoride     Resistant to high temperatures up to 1315°C (2400°F)     NLGI grade of 1 read more

Features and Benefits A 1-part, general purpose liquid thread sealant that cures at ambient temperatures to form a low-strength flexible seal against hot and cold water. LOCTITE® SI 5331 is a low-strength, medium-viscosity adhesive designed for the locking and sealing of plastic and metal fittings carrying hot or cold water, e.g. industrial and agricultural plastic water pipe systems or drainage systems. It is WRC listed, meets BS 6920 for potable water: 0706521 DVGW approval, and is tested in accordance with EN 751-1; P1 NSF Reg. No. 123620.       Works on metal or plastic     Meets BS 6920 for potable water     NSF P1 Reg. No. 123620     DVGW approval, tested in accordance with EN 751-1 Technical Information Agency approvals / certificates / specifications DVGW, NSF, WRAS Breakaway torque, Steel M10 1.5 N·m (13.0 in./lb. ) Color White Key characteristics Disassembly: easy disassembly Operating temperature -55.0 - 150.0 °C (-65.0 - 300.0 °F ) Recommended for use with Metal, Plastic Viscosity 50000.0 mPa·s (cP) read more

Features and Benefits Silicone lubricant that seals, lubricates, protects, waterproofs and insulates many common materials. If you’re looking to lubricate stopcocks, o-rings, plug valves, ball valves, or valve stem packings, give LOCTITE® LB 8801 a try. This silicone grease is ideal for sealing, greasing, protecting, waterproofing and insulating metal, rubber and plastic parts, and is applied by brushing, spraying or dabbing on the surface. LOCTITE LB 8801 has excellent resistance to water and water-based fluids, alcohols, mineral oils and vegetable oils, making it ideal for protecting electrical contacts against moisture.       Seals, waterproofs, and insulates     Can be used as a moisture barrier for electrical contacts, rubber and plastic lubricant,  mold release agent, packing lubricant for shafts and valve stems     Protects electrical connections from water infiltration and arcing and keeps moisture from forming a conductive film on electric mounts and insulators     Stops leaks     Non-curing Technical Information Application method Brush, Spray Color Translucent Key characteristics Water resistant Number of components 1 part Physical form Grease read more