DESCRIPTION Cramolin PLASTIK is a transparent, flexible, acrylic-based conformal coating ideal for protecting electronic components—including PCB boards, wires, and connectors—from environmental damage. It cures rapidly to a tough, glossy film that resists acids, salt, fungus, moisture, alcohol, alkalis, and thermal stress. Rated from −70 °C to +120 °C, it insulates and waterproofs while still allowing soldering through the coating.    ✅ Key Features: Flexible Protective Film: Forms a shiny, non-drip coating resistant to mechanical and chemical stress.  Broad Temperature Resistance: Effective from −70 °C to +120 °C. High Dielectric Strength: Provides 21 kV/mm insulation to prevent short‑circuits and corona discharge.  Chemical & Environmental Resistance: Withstands acids, salts, moisture, fungus, alkalis, and alcohol. Solder-Through Capability: Allows soldering after curing, simplifying repair and assembly processes.   📌 Recommended Applications: Electronic circuit boards (PCBs) and components requiring environmental sealing Wires, cables, connectors, sockets, and transformers Electrical insulation for motors, relays, and high‑voltage equipment Outdoors, aerospace, automotive electronics, and marine electrical applications read more

DESCRIPTION Klüberplex AG 11‑462 is a white, adhesive operating and priming grease designed for heavy-duty applications where both corrosion and wear protection are crucial. It's formulated with white solid lubricants and additives, offering excellent adhesion even at low temperatures and during prolonged standstill periods. Ideal for gear rims, open gears, bearings, sliding guide rails, and offshore/marine environments. ✅ Key Features: Dual Function Grease: Acts as a priming and operational lubricant for gear and bearings.  High Wear & Corrosion Protection: Extends component life under heavy loads and saltwater exposure.  Clean, White Lubricant: Contains white solid particles that minimize contamination in the machine environment.  Adhesive at Low Temps: Stays in place even at temperatures down to –10 °C.  Wide Operating Range: −10 °C to +150 °C; sprayable at 0 °C with proper ventilation.    📌 Recommended Applications: Gear rim and pinion drives (also for contact pattern inspection) Bearings, sliding guides, and steel cables on cranes, winches Marine/offshore gear systems exposed to saltwater Wind turbines and industrial installations during long shutdowns read more

Synthetic lubricating grease for the food and pharmaceutical processing industry Klübersynth UH1 14-1600 ==>  a synthetic high-performance lubricating grease. It is registered as NSF H1 and complies with FDA 21 CFR Sec. 178.3570. Klübersynth UH1 14-1600, an NSF H1-registered lubricant, is a contributor towards the supporting of food safety. The use of this lubricant needs to be considered not in isolation but in line with other appropriate actions which have by law to be fulfilled by a food manufacturing plant to allow for food to be manufactured safely. Its soft consistency, good wear protection and scuffing load stage 11 in the FZG test ensure good lubricant distribution and reduced wear in the gear. read more

OIL & GAS PRODUCTION COMPOUND - LEAD BASED DESCRIPTION BESTOLIFE® 72733 is a high pressure, high temperature thread compound for casing, tubing, and line pipe that exceeds API RP 5A3. It includes a special corrosion inhibitor for superior corrosion resistance as compared to API Modified. APPLICATIONS High-pressure thread compound for casing, tubing, and line pipe. PRODUCT CHARACTERISTICS Color: Dark Copper Penetration: 310-340 (ASTM D 217) Weight/Gallon: 15.8 pounds/gallon Dropping Point: ≥350°F/≥177°C (typ) Flash Point: 325°F/162.8°C (min) Brushable To: 0°F/-18°C Friction Factor: 1.0 Salt Spray: 900 Hours Shelf Life: 4 years (unopened container) Contains: Graphite, lead, zinc, copper read more

BIRKOSIT Sealing compounds used to join metallic elements in industry are subject to extreme demands due to the high temperatures and/or high pressure. read more

Synthetic high-performance gear oil for the food-processing and pharmaceutical industries with KlüberComp Lube Technology Klübersynth UH1 6 is a synthetic high-performance gear oil based on polyglycol satisfying the growing requirements and increasing power density of modern gears. Klübersynth UH1 6 includes KlüberComp Lube Technology*, i.e. it is based on especially high-grade raw materials and advanced additives, enabling maximum performance in the lubrication of all gear components. Klübersynth UH1 6 oils are NSF H1 registered and therefore comply with FDA 21 CFR § 178.3570. The lubricants were developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of Klübersynth UH1 6 oils can contribute to increase reliability of your production processes. We nevertheless recommend conducting an additional risk analysis, e.g. HACCP. Klübersynth UH1 6 is certified according to ISO 21469, thus supporting compliance with hygienic requirements of your production. You will find further information about ISO Standard 21469 on our website www.klueber.com. Klübersynth UH1 6 clearly exceeds CLP requirements according to DIN 51517-3. Corresponding gears can be switched to Klübersynth UH1 6 without prior consultation with the gear manufacturer provided the general application notes are observed. Klübersynth UH1 6 offers high scuffing load capacity. Gears are sufficiently protected against scuffing even at extremely high peak loads, vibrations or oscillations, or if no running-in was performed. The excellent wear protection of both gears and rolling bearings ensures that the service life calculated for the lubricated components is achieved, leading to lower maintenance and repair costs. The oil's high micropitting resistance of GFT ≥ 10 according to FVA 54/7 offers sufficient protection to gears that are subject to high loads and would normally be susceptible to this type of damage. Klübersynth UH1 6 offers a much longer service life than mineral oils due to the excellent ageing and oxidation resistance of the selected raw materials; thus service intervals can be extended and maintenance costs reduced. In certain applications, even lifetime lubrication is possible. The product's low foaming tendency and anti-corrosive properties enable problem-free gear operation. Freudenberg seals made of 72 NBR 902, 75 FKM 585, 75 FKM 260466 and 75 FKM 170055 are resistant to Klübersynth UH1 6. Leakage and oil contamination are prevented. The excellent viscosity-temperature behaviour supports the formation of a sufficient lubricant film across a wide service temperature range, even at elevated and high temperatures. Therefore, a single viscosity grade can cover both low and high temperatures in many applications. The optimised friction behaviour enabled by the carefully selected base oils based on polyglycol reduces power loss and improves gear efficiency, especially in worm gears. Due to the optimised additives, wear values are reduced and a very low wear intensity according to DIN 3996 (calculation of load capacity of worm gears) is achieved. Klübersynth UH1 6 is approved by Siemens-Flender, Siemens Geared Motors, SEW Eurodrive, Getriebebau Nord, Stöber Antriebstechnik, Lenze, ZAE Antriebssysteme, Baldor, Boston Gear, Bonfiglioli, Watt Drive, etc. read more

DESCRIPTION Weicon Stainless Steel Polish Spray is a high-performance solution crafted for the maintenance, protection, and enhancement of stainless steel surfaces. Its advanced formulation not only cleans but also imparts a brilliant shine, leaving a protective layer that resists fingerprints and corrosion. Ideal for both matte and polished finishes, this spray ensures surfaces remain spotless and gleaming. ✅ Key Features: High-Gloss Finish: Restores and enhances the natural shine of stainless steel. Protective Layer: Forms a protective barrier that resists fingerprints and corrosion. Versatile Application: Suitable for both matte and polished stainless steel surfaces. Easy to Use: Spray-on application for quick and efficient results. 📌 Recommended Applications: Kitchen appliances and equipment Elevators and escalators Handrails and balustrades Industrial machinery and tools Stainless steel furniture and fixtures     read more

Klübersynth UH1 14-151 Synthetic lubricating grease for the food and pharmaceutical processing industry Klübersynth UH1 14-151 was especially developed for the food processing and pharmaceutical industry. Klübersynth UH1 14-151 shows good anti-wear properties, water resistance and corrosion protection as well as a high ageing and oxidation stability. Klübersynth UH1 14-151 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of Klübersynth UH1 14-151 can contribute to increase reliability of your production processes. We nevertheless recommend conducting an additional risk analysis, e.g. HACCP. read more