DESCRIPTION CRC Red Urethane Seal Coat is a single-component polyurethane coating designed to insulate electrical equipment and protect against moisture and corrosion. Its red color facilitates easy visual inspection, ensuring thorough coverage.​ ✅ Key Features: Electrical Insulation: Non-conductive film with a dielectric strength of 3,100 volts/mil. Durable Protection: Resistant to moisture, salt spray, abrasion, and chemicals. High-Temperature Resistance: Withstands temperatures up to 121°C (250°F). Fast Drying: Tack-free in 15–30 minutes; fully cures in 72 hours. Easy Application: Ready-to-use aerosol; no mixing or cleanup required. 📌 Typical Applications: Electric motor windings Terminals and bus bars Commutator ends and stator coils Printed circuit boards (PCBs) Transformer ends and housings Terminal strips, screw connections, and switch boxes read more

DESCRIPTION WEICON Galva Spray provides long-lasting cathodic corrosion protection, colour-matched to fresh hot-dip galvanised steel. It forms a strongly adherent, fast-drying protective layer that resists rust, corrosion, saltwater, and heat up to 300°C. ✅ Key Features: Excellent corrosion resistance (450+ hours in salt spray test – DIN EN 9227) Matches hot-dip galvanised surface colour Resists fresh and salt water, heat resistant up to 300°C Suitable as a primer or finish coat Ideal for: Galvanised part repairs, welded joints, drill holes, car body primer, and spot welding read more

DESCRIPTION CRC Zinc It is a single-component zinc-rich coating formulated with special epoxy resins to provide long-term protection for bare steel and iron surfaces. It delivers the same advantages as hot-dip galvanising, forming a flexible, cathodic protective film to prevent rust and corrosion. 📌 Applications: Ideal for structural steel, fencing, trailers, welding seams, rivet holes, roofs, storage tanks, transformers, oil rigs, ships, transmission towers, and coastal or salt-exposed environments. ✅ Features & Benefits: Easy aerosol application High zinc content for cathodic rust protection Strong adhesion & flexible coating Suitable for touch-ups over galvanised surfaces Lead-free & excellent weldability read more

Features and Benefits Blue, fast curing, low strength, cyanoacrylate-based adhesive for locking metal and plastic fasteners. LOCTITE® 425 is a dark blue, cyanoacrylate-based adhesive specially designed as a fast curing, low-strength adhesive for locking metal and plastic fasteners. Ideal for pre- or post-application. Fixture speed can be increased by using a LOCTITE® activator, such as LOCTITE® SF 7113. It is typically used in applications with an operating range of -54°C to 85°C (-65°F to 185°F).       2-minute cure on plated metal and plastic fasteners with full strength in 24 hours     Used for tamper proofing the heads of screws or potentiometers     Low strength Technical Information Application method Dispense gun Applications Threadlocking Color Dark blue Cure type Moisture cure Fixture time 90.0 sec. Full cure time, @ 25.0 °C 24.0 hr. Key characteristics Cure speed: fast cure, General purpose, Mix: no mix required, Strength: low Strength Number of components 1 part Physical form Liquid Recommended for use with Metal, Plastic Specific gravity, @ 25.0 °C 1.1 Viscosity, Brookfield - LVF, @ 25.0 °C Spindle 1, speed 30 rpm read more

Features and Benefits A primer for making polyolefin and other low-energy surfaces suitable for bonding with LOCTITE instant adhesive. Only recommended for difficult-to-bond substrates. LOCTITE® SF 770 is a primer for making difficult-to-bond substrates and low energy surfaces suitable for bonding with LOCTITE® instant adhesives. Ideal for polyethylene, polypropylene, polytetrafluoroethylene (PTFE) and thermoplastic rubber materials, it fluoresces for quality control and inspection. Not recommended in assemblies where high peel strength is required.       Prepares low-energy surfaces for bonding with instant adhesives     Only for difficult-to-bond plastics     Fluorescent under UV for quality control     Not recommended where high peel strength is required     IMPORTANT: this product was upgraded in 2021/22. Use the correct product IDH/item  number to ensure correct SDS is downloaded.   Technical Information Application method Pre-applied Color Ultra clear Key characteristics Adhesion: improves adhesion Key characteristics, Chemical Basis/Base Heptane (Original Formula); Isopropyl Acetate (Upgrade Formula) Solvent based read more

DESCRIPTION: REMA TIP TOP Solution HL-TNL4 is a CHC-free bonding solution designed for hot vulcanization of conveyor belts with fabric plies. It is suitable for use with Standard, K, and HR quality cover rubber. This solution ensures strong adhesion during splicing and repair processes, contributing to the longevity and reliability of conveyor belt systems. ✅ Key Features: CHC-Free: Environmentally friendly formulation Versatile Application: Compatible with Standard, K, and HR quality cover rubber Reliable Bonding: Provides strong adhesion for hot vulcanization processes read more

DESCRIPTION A high-performance lubricant formulated to deliver exceptional protection under extreme temperature and pressure conditions. It penetrates deep into the wire rope core, leaving a thin protective film that prevents rust and corrosion. Also shields chains and gears from dirt, sand, and dust, making it ideal for exposed outdoor operations. ✅ Features: Excellent corrosion protection Deep penetration into wire rope core Resists dust, dirt, and moisture Suitable for high-load, high-temperature applications 📌 Recommended Applications: Wire ropes Chainsaws Forklifts Elevators Open gears Heavy-duty industrial chains   read more

Features and Benefits A 1-part, colorless, very low-viscosity, non-CFC solvent agent for cleaning and degreasing surfaces. LOCTITE® SF 7063 is a colorless, methylal, and ethanol-free, solvent-based isoparaffinic, dimethoxymethane, and ethanol cleaning agent for pre-assembly cleaning and degreasing surfaces. It’s designed to effectively remove greases, oils, lubrication fluids, metal cuttings, and fines from substrates before bonding. It's also suitable for cleaning and degreasing machine components during maintenance operations.       Very low viscosity     Doesn’t contain CFC     Leaves no residue Technical Information Key characteristics General purpose, Solvent based read more

Features and Benefits This 2-part industrial-grade adhesive cures at room temperature to form a tough bondline with excellent resistance to peel and impact forces. LOCTITE® EA E-120HP is a 2-part, high viscosity, industrial-grade epoxy adhesive with extended worklife. Once mixed, it cures at room temperature to form a tough bondline with excellent resistance to peel and impact forces. You can also expect superior thermal shock resistance, excellent mechanical and electrical properties, and resistance to a wide variety of solvents and chemicals. Ideal for bonding nose cones in aerospace applications, as well as low stress, general industrial applications requiring high impact and high peel strength. It bonds dissimilar materials including aluminum, steel, and other metals, as well as a variety of plastics and ceramics.       Multi-substrate structural bonder     Resistant to peel and impact forces     120 minute work time allows for adjustments     Resistant to solvents and chemicals     Bonds dissimilar materials Technical Information Applications Bonding plastic, Structural bonding Cure type Room temperature (ambient) cure FEA (finite element analysis) Finite strain, Viscoelastic Key characteristics Shock resistant, Viscosity: high viscosity, Work life: extended work life Mix ratio, by volume 2 : 1 Mix ratio, by weight 100 : 46 Number of components 2 part Recommended for use with Ceramic, Metal: aluminum, Metal: steel, Plastic Mixed   Color, Mixed Beige Resin   Color, Resin Beige Hardener   Color, Hardener Amber read more

Features and Benefits Highly flexible, moisture-cure silicone sealant for all type of flanges. For rigid flange sealing where oil and water/glycol resistance is required, for example on transmissions. LOCTITE® SI 5699 is a flexible, form-in-place, room temperature vulcanizing (RTV) silicone sealant, which cures at room temperature on exposure to moisture in the air to form a tough rubber gasket. It is tack-free after just 10 minutes, and can be used on flexible, machined or cast surfaces, metal or plastic. Great for flange sealing and rigid flange sealing on, for example, transmissions and cast metal housings. Perfect for when water-glycol resistance is required.       Highly flexible sealing for all types of flanges     Tack-free after 30 minutes     Registered to NSF Category P1     Oil- and water/glycol-resistant     For corrosion-sensitive electrical assemblies   Technical Information Applications Highly flexible assembly gasketing Color Gray Cure type Room temperature vulcanization (RTV) cure Extrusion rate 200.0 g/min. Key characteristics Oil resistance: increased oil resistance Operating temperature -65.0 - 400.0 °F (-55.0 - 200.0 °C ) Recommended for use with Metal, Plastic Storage temperature 8.0 - 21.0 °C Tack free time 30.0 min. read more