DESCRIPTIONS A high-performance lubricant formulated to deliver exceptional protection under extreme temperature and pressure conditions. It penetrates deep into the wire rope core, leaving a thin protective film that prevents rust and corrosion. Also shields chains and gears from dirt, sand, and dust, making it ideal for exposed outdoor operations. ✅ Features: Excellent corrosion protection Deep penetration into wire rope core Resists dust, dirt, and moisture Suitable for high-load, high-temperature applications 📌 Recommended Applications: Wire ropes Chainsaws Forklifts Elevators Open gears Heavy-duty industrial chains   read more

Features and Benefits A 1-part, colorless, very low-viscosity, non-CFC solvent agent for cleaning and degreasing surfaces. LOCTITE® SF 7063 is a colorless, methylal, and ethanol-free, solvent-based isoparaffinic, dimethoxymethane, and ethanol cleaning agent for pre-assembly cleaning and degreasing surfaces. It’s designed to effectively remove greases, oils, lubrication fluids, metal cuttings, and fines from substrates before bonding. It's also suitable for cleaning and degreasing machine components during maintenance operations.       Very low viscosity     Doesn’t contain CFC     Leaves no residue Technical Information Key characteristics General purpose, Solvent based read more

Features and Benefits This 2-part industrial-grade adhesive cures at room temperature to form a tough bondline with excellent resistance to peel and impact forces. LOCTITE® EA E-120HP is a 2-part, high viscosity, industrial-grade epoxy adhesive with extended worklife. Once mixed, it cures at room temperature to form a tough bondline with excellent resistance to peel and impact forces. You can also expect superior thermal shock resistance, excellent mechanical and electrical properties, and resistance to a wide variety of solvents and chemicals. Ideal for bonding nose cones in aerospace applications, as well as low stress, general industrial applications requiring high impact and high peel strength. It bonds dissimilar materials including aluminum, steel, and other metals, as well as a variety of plastics and ceramics.       Multi-substrate structural bonder     Resistant to peel and impact forces     120 minute work time allows for adjustments     Resistant to solvents and chemicals     Bonds dissimilar materials Technical Information Applications Bonding plastic, Structural bonding Cure type Room temperature (ambient) cure FEA (finite element analysis) Finite strain, Viscoelastic Key characteristics Shock resistant, Viscosity: high viscosity, Work life: extended work life Mix ratio, by volume 2 : 1 Mix ratio, by weight 100 : 46 Number of components 2 part Recommended for use with Ceramic, Metal: aluminum, Metal: steel, Plastic Mixed   Color, Mixed Beige Resin   Color, Resin Beige Hardener   Color, Hardener Amber read more

Features and Benefits Highly flexible, moisture-cure silicone sealant for all type of flanges. For rigid flange sealing where oil and water/glycol resistance is required, for example on transmissions. LOCTITE® SI 5699 is a flexible, form-in-place, room temperature vulcanizing (RTV) silicone sealant, which cures at room temperature on exposure to moisture in the air to form a tough rubber gasket. It is tack-free after just 10 minutes, and can be used on flexible, machined or cast surfaces, metal or plastic. Great for flange sealing and rigid flange sealing on, for example, transmissions and cast metal housings. Perfect for when water-glycol resistance is required.       Highly flexible sealing for all types of flanges     Tack-free after 30 minutes     Registered to NSF Category P1     Oil- and water/glycol-resistant     For corrosion-sensitive electrical assemblies   Technical Information Applications Highly flexible assembly gasketing Color Gray Cure type Room temperature vulcanization (RTV) cure Extrusion rate 200.0 g/min. Key characteristics Oil resistance: increased oil resistance Operating temperature -65.0 - 400.0 °F (-55.0 - 200.0 °C ) Recommended for use with Metal, Plastic Storage temperature 8.0 - 21.0 °C Tack free time 30.0 min. read more

Features and Benefits A 1-part, general purpose cleaner that removes most greases, oils, lubrication fluids, metal cuttings and fines from surfaces to be bonded. For effective cleaning and degreasing of plastic components prior to bonding, choose LOCTITE® SF 7070. Suitable for use as a spray or in immersion cleaning at room temperature. This solvent-based, non-CFC cleaner can remove most oils, greases, lubrication fluids, and other contaminants from plastic parts without the risk of stress cracks.       General-purpose parts cleaner     Compatible with most plastics     Will not cause stress cracks     Can be applied by spray or immersion Technical Information Application method Dip, Spray & wipe Applications Parts cleaning Cure type Non-curing Key characteristics Pre-bonding cleaning, Solvent based Physical form Liquid Recommended for use with Plastic read more

Features and Benefits A 1-part, low-odor, low-bloom, medium-viscosity instant adhesive ideal for aesthetic applications. LOCTITE® 403 is a low-odor, low-bloom instant adhesive. This medium viscosity adhesive is ideal for applications where odor and/or blooming are a concern. LOCTITE 403 provides for rapid bonding of metals, elastomers and plastics, including difficult-to-bond plastics (PP, PE, PTFE) when used in conjunction with a primer such as LOCTITE® SF 770.       Low-odor for applications where vapor control is vital     Low-bloom for cosmetic applications     Medium viscosity for gaps of approximately 0.20 mm (0.008'')     Bonds plastics, rubbers and metals Features and Benefits Application method, Recommended Dispense system, Manual Applications, Recommended Bonding close fitting parts Color Ultra clear Fixture time, Steel 30.0 sec. Gap fill 0.2 mm Key characteristics, Recommended Bloom: low bloom, Gap filling, Odor: low odor, Surface insensitive, Viscosity: medium viscosity Operating temperature -40.0 - 80.0 °C (-40.0 - 175.0 °F ) Shear strength, Mild Steel (grit blasted) 20.3 N/mm² (2950.0 psi ) Viscosity 1200.0 mPa·s (cP) read more

Features and Benefits Ideal for use in facilities where food products are produced and/or handled. This food grade anti-seize lubricant prevents friction, seizing, and galling in stainless steel and other metal parts. Prevent seizing, galling, friction, and wear on threaded joints and other metal-to-metal surfaces with LOCTITE® LB 8014. With its combination of white lubricating solids and extreme pressure (EP) additives in an aluminum-gelled white oil, this metal-free, food-grade, anti-seize lubricant can resist temperatures up to 400°C (752°F). It’s ideal for use in industrial food industries, such as meat and poultry packing plants, dairy products processing plants, canning plants, grain processing plants, sugar processing plants, bakeries, beverage plants, breweries, and hospitals. This lubricant paste with an NLGI consistency grade of 0 is registered to NSF Category H1 for use as a lubricant with incidental food contact in and around food processing areas (a regional approval).       Registered to NSF Category H1 for use as a lubricant with incidental food contact     Metal-free      Suitable for applications with an operating range of -30°C to 400°C (-20°F to 750°F)     NLGI grade of 0 read more

Features and Benefits .LOCTITE® SF 7200 is an amber, solvent-based cleaning agent for removing any chemical gasket sealant from metal flanges. It’s particularly suitable for aluminum or other soft metal flanges where scraping could lead to surface damage. When applied, LOCTITE SF 7200 develops a foam-like layer on the gasket, preventing it from running off the desired location – even on vertical surfaces.     Easy application from an aerosol can     Keeps in place on vertical surfaces     Doesn't contain CFC     Removes gasket sealants in 10-15 minutes ​ Technical Information Applications Parts cleaning Product Type Industrial cleaners, General industrial cleaners Technology Names Surface treatments and cleaners, liquid, solvent   read more

Features and Benefits A silver, aluminum, petroleum-based anti-seize lubricant paste fortified with graphite and extreme pressure (EP) additives. LOCTITE® LB 8150 is anti-seize lubricant paste fortified with graphite and extreme pressure (EP) additives. LOCTITE LB 8150 is a silver, aluminum, petroleum-based lubricant and is inert and won't evaporate or harden in extreme heat or cold. It can tolerate high temperatures to 900°C (1652°F) and is suitable for assemblies where such temperatures are possible.       Fortified with graphite and aluminum     Resistant to high temperatures up to 870°C (1600°F)     Protects metal parts from corrosion, seizing, and jamming in joints     Aluminum, petroleum-based lubricant paste     Inert and won't evaporate or harden in extreme heat or cold Technical Information pplication method Brush Applications Lubricating parts Color Silver Cure type Non-curing Key characteristics Aluminum based, Prevents seizing/galling, Temperature resistant Physical form Grease Recommended for use with Metal read more

Features and Benefits LOCTITE® MR GS2 is a black, slow drying, flexible setting, solvent-based sealant paste, which changes to a pliable, non-hardening film. It seals flanges, fittings, connections and flexible assemblies, and improves the sealing of pre-formed gaskets made of, e.g., cork, metal, plastic or rubber in non-rigid assemblies that may require disassembly at frequent intervals. Solvent based Flexible setting Can also be used for repair of damaged pre-cut gaskets Increases the reliability of gasket seals Improves sealing performance of pre-formed gaskets     read more