Features and Benefits A 1-part, exceptionally low-viscosity instant adhesive forming an ultra thin adhesive film for smallest adhesive gaps in seconds (fast-fixturing). Suitable for plastics and elastomeric materials. LOCTITE® 406 is a low-viscosity instant adhesive designed especially for the fast bonding of plastics and rubbers. It fixes the adhering components in seconds and hardens very quickly, forming an ultra thin bond. Using the primer LOCTITE® SF 770, the assembly of difficult-to-bond (PP, PE, PTFE) materials is possible.      Rapid fixture time on plastic and rubber, including EPDM      Assembles difficult-to-bond materials using LOCTITE SF 770 primer      Very low viscosity product for small gaps      Reduced hazardous ingredients for improved occupational safety read more

Aerochem Industries Sdn Bhd is the Malaysia Loctite authorized distributor, since 2000,  that engaged in the marketing, sale and distribution of adhesives, chemicals, coatings, epoxy composites and lubricants. Our main office is located at Taman Mount Austin, Johor Bahru (JB). Besides, Aerochem Industries Sdn Bhd also provide other brands of  industrial lubricants and  greases,  metalworking fluids, chemicals. Vision and Mission Our goal is to provide our customers with prompt & effective solution. We strive to bring value to our customers by providing them the most convenient way to source after sale service, and at a competitive price. read more

Synthetic hydraulic water and corrosion protection concentrate Stable against salt and alkali entrainment, for immersion and filling applications read more

Synthetic regular load greases for food and beverage processing equipment Performance Features Noted for their long life Good water resistance ensures lasting protection even in the presence of large amounts of water Good oxidation and mechanical stability. Resists the formation of deposits caused by oxidation at high operating temperatures and maintain consistency, reducing leakage Effective corrosion protection. Ensures components/ bearings do not fail due to corrosion Good adhesive properties reduce losses thereby reducing grease consumption Neutral odour and taste Certifications and Specifications NSF H1 NSF ISO 21469 Kosher Halal read more

Benefits for your application – Tribological surface finish with extremely low frication value and a high wear protection – Resistant to ageing – Very good lubricating properties under high load – High-pressure absorbing capacity – Highly adhesive and largely resistant to water read more

Environmentally compatible, synthetic high-performance gear oils Klüberbio EG 2 oils are ultimately biodegradable gear oils based on synthetic ester oil. They contain ≥90 % of renewable raw materials. Klüberbio EG 2 oils show a high shear stability and form a strong hydrodydamic oil film even when subject to high loads. They have a high scuffing resistance, protecting gear teeth reliably against fretting damage even at high peak loads. Klüberbio EG 2 oils achieve the U.S. EPA's requirements for classification as an Environmentally Acceptable Lubricant (EAL). Therefore, these high-performance lubricants meet the biodegradability, minimally toxic, and non-bioaccumulating standards set in Appendix A of the U.S. EPA's 2013 VGP (Vessel General Permit). Klüberbio EG 2-150 also complies with the European Ecolabel. read more

DESCRIPTION Cramolin PLASTIK is a transparent, flexible, acrylic-based conformal coating ideal for protecting electronic components—including PCB boards, wires, and connectors—from environmental damage. It cures rapidly to a tough, glossy film that resists acids, salt, fungus, moisture, alcohol, alkalis, and thermal stress. Rated from −70 °C to +120 °C, it insulates and waterproofs while still allowing soldering through the coating.    ✅ Key Features: Flexible Protective Film: Forms a shiny, non-drip coating resistant to mechanical and chemical stress.  Broad Temperature Resistance: Effective from −70 °C to +120 °C. High Dielectric Strength: Provides 21 kV/mm insulation to prevent short‑circuits and corona discharge.  Chemical & Environmental Resistance: Withstands acids, salts, moisture, fungus, alkalis, and alcohol. Solder-Through Capability: Allows soldering after curing, simplifying repair and assembly processes.   📌 Recommended Applications: Electronic circuit boards (PCBs) and components requiring environmental sealing Wires, cables, connectors, sockets, and transformers Electrical insulation for motors, relays, and high‑voltage equipment Outdoors, aerospace, automotive electronics, and marine electrical applications read more

DESCRIPTION Klüberplex AG 11‑462 is a white, adhesive operating and priming grease designed for heavy-duty applications where both corrosion and wear protection are crucial. It's formulated with white solid lubricants and additives, offering excellent adhesion even at low temperatures and during prolonged standstill periods. Ideal for gear rims, open gears, bearings, sliding guide rails, and offshore/marine environments. ✅ Key Features: Dual Function Grease: Acts as a priming and operational lubricant for gear and bearings.  High Wear & Corrosion Protection: Extends component life under heavy loads and saltwater exposure.  Clean, White Lubricant: Contains white solid particles that minimize contamination in the machine environment.  Adhesive at Low Temps: Stays in place even at temperatures down to –10 °C.  Wide Operating Range: −10 °C to +150 °C; sprayable at 0 °C with proper ventilation.    📌 Recommended Applications: Gear rim and pinion drives (also for contact pattern inspection) Bearings, sliding guides, and steel cables on cranes, winches Marine/offshore gear systems exposed to saltwater Wind turbines and industrial installations during long shutdowns read more

Synthetic lubricating grease for the food and pharmaceutical processing industry Klübersynth UH1 14-1600 ==>  a synthetic high-performance lubricating grease. It is registered as NSF H1 and complies with FDA 21 CFR Sec. 178.3570. Klübersynth UH1 14-1600, an NSF H1-registered lubricant, is a contributor towards the supporting of food safety. The use of this lubricant needs to be considered not in isolation but in line with other appropriate actions which have by law to be fulfilled by a food manufacturing plant to allow for food to be manufactured safely. Its soft consistency, good wear protection and scuffing load stage 11 in the FZG test ensure good lubricant distribution and reduced wear in the gear. read more