CRC Extreme Pressure Anti-Seize Engine Assembly Lubricant  (SL3331) ==> a lithium hydroxy strearate-based grease with excellent adherence qualities. Extreme Pressure Anti-Seize Engine Assembly Lubricant adheres to metal surfaces to prevent destructive metal to metal contact. Fortified with Molybdenum disulfide and graphite, it will prevent contact friction, galling and wear on all types of engines and parts during assembly, start-up and break-in periods. Continued use prevents damage caused by extreme conditions, increasing performance and prolonging equipment life.  Applications Recommended for use in the assembly of all mechanical pats. Excellent for lubricating areas of rotation sliding contact, such as cylinders, crank shafts and cam shafts. Also recommended for coating internal engine parts during assembly. Features & Benefits • Prevents Corrosion. Contains anti-rust and anti-wear additives to improve equipment life. • Contains a High Percentage of Moly & Graphite. • High Timken OK Load Rating. Contains extreme pressure additives (EP). • Non Conductive, Non-Corrosive. With proper use, won’t mar or pit equipment surfaces. • Water Resistant. Resists washout to prolong performance. • Reduces Torque & Eliminates Heat Freezing. Minimizes wear on metal-to-metal contact points. • Never Becomes Brittle. Stays soft to ensure protection of parts. • No known ozone depleting chemicals. Offers effective performance while complying with the EPA regulations on the use of ozone depleting chemicals. read more

APPLICATION • Suitable for rolling-element bearings in oven fans, driers, conveyors, clutch release bearings, plastic components FEATURES Low evaporation • High oxidation resistance • Good resistance to water washout • Compatible with many plastics • Wide service temperature range read more

A high performance, titanium reinforced epoxy engineered for making critical repairs to machinery and precision parts. Features and benefits • Temperature resistance to 176°C • Excellent chemical resistance • Compression strength of 124 MPa • Qualifies under mil spec DOD-C-24176B • Non-rusting, machinable to a metallic finish Recommended Applications • Restore bearing housings and scored shafts • Rebuild wear rings, hydraulic rams and valves • Repair equipment and parts that require a machined finish read more

MOLYKOTE® EM-50L Grease Lubricating grease developed for plastic components. Key Properties NLGI Grade 1 - PAO based grease with a base oil viscosity of 1050 cSt at 40 C, lithium thickened, with no solid lubricants. Applications Automobiles, electrical appliances, precision equipment, audio equipment, and office equipment that have plastic parts. Used as a damper grease to reduce noise in moving parts such as gears.  (Gears, Gear Boxes, Pumps; Plastic Lubrication; Rubber & Elastomer Lubrication) Features & Benefits Compatible with most plastics, Effective in reducing noise from plastic gears, Long service life, Low seepage, so it can be used in places wherein cleanliness is required, Does not contain silicone thereby preventing problems. read more

The RENOLIN SC series (32, 46, 68 ) was developed to meet the increased requirements of vane and screw compressors. Due to the function of screw compressors, intensive swirling of the cooling oil and air occurs. At final compression temperatures of up to 110°C, the oils are subjected to a strong oxidative attack that accelerates aging. The selection of special synthetic base oils and additive systems makes long, interruption-free operations possible. To ensure optimum performance of the oil separator, the air release properties and low foaming are characteristic for screw compressor oils. Excellent wear protection and the requirements listed above describe the performance capability of the RENOLIN SC series.   read more

Description Hylomar Universal Blue ==>a polyester urethane based sealant that is non-setting and nonhardening even at high temperatures. The compound is resistant to a wide range of fluids including all industrial fuels, oils, water and brine, air, turbine and piston engine combustion products, water, water/glycol and methanol mixtures, petroleum and synthetic diester lubricating oils, gasoline and kerosene fluids (Avtur & Avcat) and fluorocarbon refrigerants. Hylomar Universal Blue can be used to seal joint faces or threaded parts. read more

Pennzoil Premium Lithium Complex Grease #2 is a high-performance, multi-purpose grease designed for demanding automotive, industrial, and agricultural applications. Formulated with lithium complex thickener and high-quality base oils, it provides excellent protection against wear, rust, and oxidation in high-temperature and high-load conditions.   ✅ Key Features: High-Temperature Stability: Maintains performance in operating temperatures up to 177°C (350°F), suitable for wheel bearings and chassis components. Superior Protection: Guards against rust, corrosion, and oxidation even under heavy-duty use. Excellent Water Resistance: Performs reliably in wet or humid conditions, resisting washout. Multipurpose Use: Ideal for both automotive and industrial applications including bearings, joints, and general machinery. Long Service Life: Reduces re-lubrication intervals with durable, long-lasting formulation.   📌 Recommended Applications: Automotive wheel bearings and suspension parts Industrial machinery and equipment Agricultural and construction vehicles General-purpose lubrication requiring NLGI No. 2 grease   read more