Klüberpaste ME 31-52 Article-No: 005115Lubricating and assembly paste Klüberpaste ME 31-52 is a white/beige lubricating paste on the basis of mineral oil, calcium complex soap and inorganic solid lubricants. Besides its application as a universal assembly paste, this product offers benefits especially in friction points with small to minimum motion under high static and dynamic loads. read more

ISOFLEX® TOPAS L 32 and L 32 N Special low-temperature greases — Exceed OEM requirements of -40°C — Long service life due to high corrosion protection and resistance to oxidation and ageing — Many years of successful use in the automotive industry (specified and approved by most car manufacturers and component suppliers wordlwide) Application ISOFLEX® TOPAS L 32 and L 32 N are especially used for the lubrication of small gears used in automotive engineering for electrical adjustment mechanisms, e.g. window lifters, sun roofs, seats, headlamps, fan flaps. Both products have been approved by renowned car manufacturers, such as Volkswagen VW TL 778 A DaimlerChrysler DBL 6827.40 and DaimlerChrysler DBL 6827.41. ISOFLEX® TOPAS L 32 and L 32 N can also be used for: • guideways, bowden cables, door locks • rolling bearings in small motors, fans, pumps • tooth flanks with plastic/plastic (e.g. POM, PA and PE) or plastic/steel material combinations. Description ISOFLEX® TOPAS L 32 and L 32 N have been designed for extremely low temperatures. These greases consist of a synthetic hydrocarbon oil and a special lithium soap. ISOFLEX® TOPAS L 32 and L 32 N are resistant to ageing and oxidation and provide good corrosion protection as well as water resistance read more

Klüberoil 4 UH1-460 N Article-No: 029043Synthetic gear and multipurpose oil for the food-processing and pharmaceutical industries Klüberoil 4 UH1 N is a synthetic high-performance gear and multipurpose oil based on polyalphaolefin satisfying the growing requirements and increasing power density of modern gears. Klüberoil 4 UH1 N is based on high-grade raw materials and advanced additives, enabling maximum performance in the lubrication of all gear components. Klüberoil 4 UH1 N is registered as NSF H1 for use in the food-processing and pharmaceutical industries and complies with FDA 21 CFR Sec 178.3570. It was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of Klüberoil 4 UH1 N can contribute to increase reliability of your production processes. Nevertheless it is recommended to conduct an additional risk analysis, e.g. HACCP. Klüberoil 4 UH1 N is certified according to ISO 21469, thus supporting compliance with hygienic requirements of your production. You will find further information about ISO Standard 21469 on our website www.klueber.com. Klüberoil 4 UH1 N from ISO VG 68 to 680 clearly exceeds CLP requirements according to DIN 51517-3. Corresponding gears can be switched to Klüberoil 4 UH1 N without prior consultation provided the general application notes are observed. Gears are sufficiently protected against scuffing even at extremely high peak loads, vibrations or oscillations, or if no running-in was performed. The good wear protection of both gears and rolling bearings ensures that the service life calculated for the lubricated components is achieved, leading to lower maintenance and repair costs. Klüberoil 4 UH1 N offers a much longer service life than mineral and white oils due to the excellent ageing and oxidation resistance of the selected raw materials; thus service intervals can be extended and maintenance costs reduced. In certain applications, even lifetime lubrication is possible. The product's low foaming tendency and anti-corrosive properties enable problem-free gear operation. Oil leakage leading to contamination is prevented due to the good compatibility with elastomers. The good viscosity-temperature behaviour supports the formation of a sufficient lubricant film across a wide service temperature range, even at elevated and high temperatures. Therefore, a single viscosity grade can cover both low and high temperatures in many applications. The optimised friction behaviour enabled by the carefully selected base oils reduces power loss and improves gear efficiency. Klüberoil 4 UH1 N is approved by SEW Eurodrive, Getriebebau Nord, Stöber Antriebstechnik, Lenze, Sumitomo, Bonfiglioli, Brevini, STM, Watt Drive, etc. By using Klüberoil 4 UH1 N you can benefit from a number of advantages that will help you save costs easily and efficiently. We look forward to hearing from you. read more

Klübersynth V 64-300 Article-No: 012146Synthetic lubricating grease for drinking water taps Klübersynth V 64-300 is a special lubricating grease based on a synthetic oil with a low content of silicone oil and an inorganic thickener. This product complies with the recommendations pertaining to synthetic materials in contact with drinking water set forth by the German Health Authority. It has a high load-carrying capacity and excellent wetting properties. With more than 500 000 load cycles at a closing force of 2.5 Nm, Klübersynth V 64-300 reveals its excellent lubricating properties on the test rig for head parts based on Euro standard DIN EN 200 (required endurance: 200 000 load cycles). Klübersynth V 64-300 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of Klübersynth V 64-300 can contribute to increase reliability of your production processes. We nevertheless recommend conducting an additional risk analysis, e.g. HACCP. read more

Klϋber Lubrication introduces Klübersynth GE 14-151, a special grease for highly loaded small gears like those found in power tools. This product consists of a finely balanced combination of ester and synthetic hydrocarbon base oils with an aluminum complex soap thickener. Klübersynth GE 14-151 has a wide service temperature range, good wear protection properties and a high scuffing load capacity. It also offers excellent protection against tribocorrosion. Klübersynth GE 14-151 can be used to lubricate toothed wheels, bearings, joints and slideways. The optimized oil release behavior enables use in applications that are not sealed oil tight. With a high scuffing load capacity and good backflow behavior, the grease allows lubrication of gears with a high sliding ratio. Depending on temperature, load and sliding speed, Klübersynth GE 14-151 can even be used on steel/steel, steel/aluminum and aluminum/aluminum components. When used for lubricating trapezoidal and ball-and-screw spindles, it offers excellent wear protection and smooth running. Klübersynth GE 14-151 can be used in gears operating at peripheral speeds of approximately 10 m/s with a quasi-complete fill of the gear housing. It can maintain speeds of 20 m/s over short-term or intermittent operation. Tooth flank lubrication allows a speed of 3 m/s. read more

Castrol LM Grease 2  ==> a Multi-purpose, Lithium base grease. Lithium base greases start with specially selected mineral oils of outstanding oxidation and corrosion properties. They are manufactured to close control drop points, penetration numbers, alkalinity and ash content to offer high stability, long life, good water-proofing and excellent resistance to changes in consistency. Castrol LM Grease 2 is characterised by a smooth texture, low starting torque, high melting point and can work sucessfully at operating temperatured of 120°C and good pumpability at -30°C. Ithas a great affinity to metal surfaces which gives add protection, lubrication and resistance to high centrifugal forces. Application Castrol LM Grease 2 is a premium quality grease primarily designed for wheel bearing lubrication. It is an outstanding chassis lubricant and is suitable for automotive applications. read more

The Castrol Aircol PD range is approved by leading compressor manufacturers, and can be confidently recommended to promote efficient, economical and safe operation in air compressors of all types. The following characteristics of Aircol PD oils contribute to their high performance: - v Excellent resistance to oxidation. v Minimum carbonisation and fire and explosion risks. v Longer maintenance and overhaul intervals. v Reduced valve replacement and delivery Pipework cleaning. v Minimum down time of compressors. Lower oil consumption. v Extended oil drain intervals. v Superior protection against rusting read more

DESCRIPTION It is a long lasting product, designed to resist thermal degradation from high-amperage applications. The low viscosity properties of the fluid allows rapid flushing, fast settling of debris, and excellent finishing of work pieces.. less-refined oil. FEATURES & BENEFITS * High flashpoint, less fire-hazard. * Rapid flushing of debris. * Excellent finishing of work pieces. * High performance and heavy duty. * Exceptionally fast discharge rate. * Extremely low odor. * No chlorine content, ozone friendly. * Long shelf life. read more