Permatex  Prussian Blue PRODUCT DESCRIPTION S.I.N.: 834-300 Permatex® Prussian Blue is a non-drying blue, oily paste type pigment designed to identify points of interference and high spots on precision parts to be fitted. It speeds tracing and precision fittings of close tolerance assemblies. Makes improper fitting high spots immediately visible as bright blue streaks. PRODUCT BENEFITS • Simple to apply • Improper fitting spots immediately visible • Non drying • Easy clean-up TYPICAL APPLICATIONS • Bearings • Valves • Gears • Other close tolerance or machined assemblies DIRECTIONS FOR USE 1. Coat parts with a uniform film of Prussian Blue. 2. Assemble in working position, turn shaft. 3. Improper fitting will show up as a definite, easy-to-see, bright blue streak. 4. Correct the seating of the assembly. 5. Wipe clean. read more

SEALXPERT PS108 HI-TEMP REPAIR PUTTY     FEATURES:   Withstands high temperature up to 230 °C (446 °F) (continuous) and 280 °C (536 °F) (intermittent) Nickel alloy-filled two-component epoxy putty Suitable for engine parts repairs Can be drilled, tapped, machined or painted APPLICATION:   Used for repairing abrasion, scratch, and crack etc. on equipment operating at high temperature Applicable to watercrafts, automobiles, machineries in petrochemical, power plant etc. read more

SEALXPERT PS110 TITANIUM REPAIR PUTTY FEATURES: Titanium filled two-component epoxy putty High performance Excellent chemical resistance Withstands heavy loads in harsh chemical environments Can be drilled, tapped, machined or painted.   APPLICATION: Suitable for repairing and rebuilding on load bearing components Applicable for repairs to machineries and equipment that can be precision machin read more

Product Details Chain and Drive Lubricant Chain and drive, heat dissipating lubricant, specifically developed for chain lubrication in conjunction with the manufacturers of the fork lift trucks. Offers maximum adhesion to chain links. Resists water wash off' and dust absorption and can be applied to running chains. High temperature resistance up to 300 degC. read more

SILVER VHT Protects up to 800°C For manifolds and exhausts Oil and petrol resistant Size: 500ml   Product Code: SIMVHT22D   Variants: Black VHT, Silver VHT, Red VHT, Blue VHT read more

DESCRIPTION   Crown Cold Galvanize Coating offers superior corrosion protection for ferrous metals by delivering a high-purity zinc layer that bonds directly to metal surfaces. This coating acts as a sacrificial anode, ensuring long-term defense against rust and corrosion. ✅ Key Features: High Zinc Content: Contains 93% pure zinc in the dry film, providing robust galvanic protection. Standards Compliance: Meets MIL-P-46105(MR), MIL-P-21035B, and DOD-P-21035A specifications. Salt Spray Resistance: Withstands 2000 hours in 5% salt spray testing (ASTM B-117). Versatile Application: Can be sprayed, brushed, or dipped onto metal surfaces. Weld-Through Primer: Functions effectively as a weld-through primer. Finish: Dries to a light gray, matte finish. 📌 Recommended Applications: Industrial sectors such as aviation, marine, and manufacturing. Maintenance of structural steel, pipelines, and metal fabrications. Touch-up for damaged galvanized surfaces read more

CRC THROTTLE BODY & AIR INTAKE CLEANER 400G Product Code: 5079 DESCRIPTION:   Regular cleaning with CRC Throttle Body & Air Intake Cleaner restores engine performance, improves fuel economy and reduces engine wear. APPLICATIONS:   Recommended to remove harmful deposits from throttle bodies and air intake systems in fuel injected vehicles FEATURES/BENEFITS:   Removes and prevents build-up of harmful throttle body deposits. Restores engine performance. Improves fuel economy. Reduces engine wear. Safe on coatings, sensors, O-ring seals and other sensitive components. Lubricates and protects moving parts. 360° Valve, ensures that all usable product is expelled from can. read more

CRC Mass Air Flow Sensor Cleaner  ==>a safe and effective way to clean delicate MAF sensors in modern vehicles. Engines rely heavily on accurate readings from the MAF sensor to run smoothly and efficiently. A contaminated sensor is likely to cause poor fuel economy, excessive emission, power loss, hard starting, stalling and even gear problems. Located between the air filter and the throttle body, the MAF sensor can easily be cleaned with just a few sprays of CRC Mass Air Flow Sensor Cleaner – it only takes a few minutes. For maximum performance use CRC Throt-L-Body and CRC Mass Air Flow Sensor Cleaner every time air filter is serviced. Features & Benefits Cleans & Protects MAF Sensors – Will not damage MAF sensors or housing (unlike other chemicals) Plastic Safe & Residue Free – Evaporates in seconds Improves Air/Fuel Ratio Increases km/litre – Improves fuel economy Increases/Restores Horsepower – Gains 4-10 horsepower Reduces Rough Idle Decreases Hesitation & Pinging Comes with Perma Straw - Choose pin-point stream or regular spraying action Uses Recommended for the safe and effective cleaning of MAF sensors read more

LPS Cold Galvanize Corrosion InhibitorCold Features Flexible coating will not yellow, chalk, crack, or peel Inhibits rust on steel under aggressive conditions Commonly used as a flash rust preventive on welded areas Withstands water temperature up to 212°F (100°C) and continuous dry heat up to 750°F (400°C) Works like a hot-dip on ferrous metals indoors and outdoor Zinc-rich galvanized coating - Zinc Purity: 99+%  Applications Air Conditioning Parts Chain Link Fences Ducts Heating Parts Machine Housing Material Handling Equipment Newly Welded Surfaces Outside Storage Tanks GalvanizeCoCold GalvanizeCorrosion Inhibitorrrosion Inhibitor read more

ambersil ISOPROPYL ALCOHOL CLEANING SOLVENT A gentle yet highly effective alcohol based cleaner for use on optical devices, switches, PCB’s and on general electronics. • Excellent materials compatibility: safe for use on plastics, rubber, composites, metal and painted surfaces • Conforms to BS 1595, ASTM D770, and DIN 53245 • Zero residue • Removes moisture read more