28, Jalan Mutiara Emas 5/27,
Taman Mount Austin,
81100 Johor Bahru,
Johor, Malaysia.
+6019-8532209
+607-3649508
+607-3649508
+607-3503010
Aerochem Industries Sdn Bhd
28, Jalan Mutiara Emas 5/27,
Taman Mount Austin,
81100 Johor Bahru,
Johor, Malaysia.
28, Jalan Mutiara Emas 5/27,
Taman Mount Austin,
81100 Johor Bahru,
Johor, Malaysia.
Loctite 515
| Previous | 1 / 6 | Next |
Features and Benefits
This anaerobic-curing flange sealant for rigid machined metal flanges fills gaps up to 0.25 mm (0.01'') and typically provides a 30-minute fixture time.
LOCTITE® 515 is a form-in-place anaerobic-curing flange sealant that cures when confined in the absence of air between close fitting metal surfaces. It seals close fitting joints between rigid metal faces and flanges and will flex with minor flange movements. It provides resistance to low pressures immediately after assembly of flanges, and is typically used as a form-in-place gasket for pumps, thermostats, compressors, transmission housing,s and axle covers. The product is fluorescent under UV light, allowing visual inspection of the bead.
- For machined metal components
- Forms a perfect seal
- Gap fill up to 0.25 mm (0.01'')
- Form-in-place sealant
- Fluorescent under UV for quality control
Technical Information
| Application method | Dispense system, Manual |
| Applications | Rigid assembly gasketing, Sealing |
| Chemical basis / base | Methacrylate |
| Color | Purple |
| Cure type | Anaerobic cure |
| Fixture time | 30.0 min. |
| Gap fill | 0.25 mm |
| Key characteristics | Fluorescent, For machined, rigid flanges, Strength: medium strength, Thixotropic |
| Lab shear strength | 6.0 N/mm² |
| Number of components | 1 part |
| Physical form | Gel |
| Recommended for use with | Metal: aluminum, Metal: steel |
| Storage temperature | 8.0 - 21.0 °C |
| Viscosity, Brookfield - HBT, @ 25.0 °C Spindle TB, speed 0.5 rpm, Helipath | 700000.0 - 1700000.0 mPa·s (cP) |
| Viscosity, Brookfield - HBT, @ 25.0 °C Spindle TB, speed 5.0 rpm, Helipath | 150000.0 - 375000.0 mPa·s (cP) |